Thermal conduction in semiconductors
Drabble, J. R ; Goldsmid, H. J
Pergamon. 1961.

Thermal conduction in solids
Berman, R
Oxford. Clarendon Press. 1979. xi,193p.

Thermal conductivities of walls, concretes and plasters
Griffiths, E
HMSO. 1928. 19p.

Thermal conductivity: nonmetallic liquids and gases
Touloukian, Y. S ; Liley, Peter E ; Saxena, S C
New York. IFI/Plenum. 1970.

Thermal conductivity
Tye, R. P
London. Academic P. 1969. xxii,353p.

Thermal conductivity: proceedings of the 7th Conference,held at the National Bureau of Standards, Gaithersburg,November 1967
Flynn, Daniel R ; Peavy, Bradley A
Washington. U.S.G.P.O. 1968.

Thermal conductivity: proceedings of the seventh conference held at the National Bureau of Standards, Gaithersburg, Maryland November 13-16, 1967
Flynn, Daniel R ; Peavy, Bradley A
Washington, DC. National Bureau of Standards. 1968.

Thermalconductivity: proceedings
Ho, C. Y ; Taylor, R. E
New York. Plenum Press. 1969. xx, 1169 p.

Thermal conductivity 15
Mirkovich, Vladimir V
New York . Plenum Press. 1978. xviii,493p.

Thermal conductivity 16
Larsen, David C
New York . Plenum Press. c1983. xx,623p.

Thermal conductivity 17
Hust, Jerome G
New York. Plenum Press. c1983. xvii, 793 p.

Thermal Conductivity 20: [proceedings of the Twentieth International Thermal Conductivity Conference, held October 19-21, 1987, in Blacksburg, Virginia
Hasselman, D. P.H ; Thomas, J. R
New York, N.Y. . Plenum Press. c1989.

Thermal conductivity and drying studies in moistened granular beds
Gerrard, Philip
Birmingham. University of Birmingham. 1973.

Thermal conductivity determinations on uranium dioxide by a radial flow method
Howard, V. C ; Gulvin, T. F
H.M.S.O. 1961. 12p.,ill.,28cm.

Thermal conductivity in niobium-tantalum and pure niobium at low temperatures
Lowe, Lawrence Sherwin
Birmingham. University of Birmingham. 1979.

Thermal conductivity measurement by an improved a.c. hot-wire method
Irving, J. B ; Jamieson, D. T
Glasgow. NEL. 1976.

Thermal conductivity measurements of insulating materials at cryogenic temperatures: a symposium
Philadelphia. American Society for Testing and Materials. 1966.

Thermal conductivity of alkyl ethers
Jamieson, D. T ; Cartwright, G
Glasgow. NEL. 1978.

Thermal conductivity of binary liquid mixtures
Jamieson, D. T ; Irving, J B
Glasgow. NationalEngineering Laboratory. 1974.

Thermal conductivity of boron nitride
Simpson, Anthony
Salford. University of Salford. 1972.

Thermal conductivity of building materials
Rowley, Frank B ; Algren, Axel B
Minneapolis. University ofMinnesota. 1937.

Thermal conductivity of electrolytic iron, SRM 734, from 4 to 300 K
Hust, Jerome G ; Sparks, Larry L
Washington, D.C. National Bureau of Standards. 1970.

Thermal conductivity of gases and liquids
Tsederberg, N V ; Cess, R. D
London. Edward Arnold. 1965. xiv,246p.

Thermal conductivity of high modulus fibre reinforced composites
Harris, Jon Philip
Salford. University of Salford. 1980.

Thermal conductivity of niobium and niobium-tantalum at low temperatures
Muirhead, Christopher Michael
Birmingham. (n.pub.). 1972.

Thermal conductivity of porous catalyst pellets
Sharma, Chandra Shekhar
Salford. University of Salford. 1973.

Thermal conductivity of selected materials
Ho, C. Y ; Powell, R. W ; Liley, PeterE
Washington. U.S. Dept. of Commerce, National Bureau of Standards. 1968.

Thermal conductivity of silicone oils
Jamieson, D. T ; Cartwright, G
Glasgow. NEL. 1977.

Thermal conductivity of silicone oils of the polydimethyl siloxane type
Jamieson, D. T ; Irving, J B
London. Institute of Petroleum. 1974.

Thermal conductivity of silicone oils of the polydimethyl siloxane types
Jamieson, D. T ; Irving, John Bruce
London. Institute of Petroleum. 1974.

Thermal conductivity of the elements: a comprehensive review
Ho, C. Y ; Powell, R W ; Liley, Peter E
New York. American Chemical Society and the American Institute of Physics, for the National Bureau of Standards. 1974.

Thermal conductivity studies on carbon fibre reinforced composites
Pilling, Martin William
Salford. University of Salford. 1977.

Thermal configuration changes in work-rolls and their utilization for the control or regulation of the shape when cold-rolling strip steel
Pawelski, P ; Sparthmann, R
Luxembourg. Directorate-General Information Market and Innovation, Commission of the European Communities. 1981.

Thermal considerations in the surface behaviour of insulators
Lavelle, Denis Oliver
1970. 1 v.

Thermal contact conductance
Madhusudana, C. V
New York. Springer. c1996. xvi, 165p.

Thermal contacts between metal and glass for use at cryogenic temperatures
O'Brien, Kevin ; Witteborn, Fred C

Thermal control of buildings
Fisk, D.J
London. Applied Science. c1981. xvii,246p.

Thermal convection in liquid metals
Carruthers, John R
Canada. National Library. 1967. 1 microfilm.

Thermal conversion systems for municipal solid waste
Hickman, H. L
Park Ridge, N.J. Noyes. 1984.

THERMAL Conversion systems for municipal solid wastes
Park Ridge, N.J. Noyes Publications. 1984. 745p.

Thermal cracking in concrete at early ages
Springenschmid, R
London. E & FN Spon. 1995. xv,470p.

Thermal cracking of cast iron
Hardaker, Peter
1958.

Thermal cycling in compact plate type heat exchanges
Singh, Gurnam
Wolverhampton. The Polytechnic, Wolverhampton, School of Mechanical, Electrical and Production Engineering. 1981.

Thermal damage of red cells
Baar, Stella
Birmingham. University of Birmingham. 1980.

Thermal decomposition of aryl azides and 2,1-benzisoxazoles
Smith, Richard Howard
Salford. University of Salford. 1979.

Thermal decomposition of some halohydrocarvons in shock waves monitored by time-of-flight mass spectrometry
Wells, David Eric
Salford. University of Salford. 1973.

Thermal decomposition of tris (ethylenediamine) chromium (111) chloride
Rock, Michael
University Microfilms. 1960. 113p.

Thermal deformation in frictionally heated systems
Burton, Ralph A
Lausanne . Elsevier Sequoia. 1980.

Thermal degradation of copolymers
Gandhi, I
Bradford. 1970. 95p.

Thermal degradation of military standard pesticide formulations
Shih, Christopher C
Springfield Va. Distributed by National Technical Information Service, U.S. Dept. of Commerce. 3 microfiches.

Thermal degradation of natural and modified Keratins: An investigation into the thermal degradation of Keratin and related proteins as observed primarily through the use of thermogravimetry and evolved gas analysis
Hole, Philip Norman
Bradford. The author. 1975. 270p.

Thermal degradation of organic polymers
Madorsky, S. L
Interscience. 1964.

Thermal degradation of poly (N-cyclohexyl acrylamide)
Chan, P L
Bradford. 1978. 103p.

Thermal degradation of some thermosetting resins
Clarkson, Michael J
Bradford. 1971. 54p.

Thermal degradation studies of fibers and composite base materials
Pazinet, M. L ; DiPietro, C ; Merritt, C
(Springfield, Va.). National Technical Information Service. 1976.

Thermal degradation studies on impregnated cellulose
Hoath, James Michael
Salford. University of Salford. 1983.

Thermal depolymerisation of waste tires by heavy oils: conversion into fuels
Audibert, F ; Beaufils, J. P
Luxembourg. Commission of the European Communities. 1984.

Thermal design
Haywards Heath. British Flat Roofing Council. [1985?].

Thermal design and optimization
Bejan, Adrian ; Tsatsaronis, G ; Moran, Michael J
New York . John Wiley. c1996. xv,542p.

Thermal design of aeroassisted orbital transfer vehicles
Nelson, H. F
New York, NY. American Institute of Aeronautics and Astronautics. c1985. xiii, 566 p.

Thermal design of buildings
Rogers, T. S
Wiley. 1964.

Thermal design of electronic circuit boards and packages
Dean, D. J
Ayr. Electrochemical. 1985. xviii,379p.

Thermal design of electronic equipment
Remsburg, Ralph
Boca Raton . CRC. c2001. 372p.

Thermal design of nuclear reactors
Winterton, R. H. S
Oxford. Pergamon. 1981. x,192p.

Thermal design of underground systems
Weedy, B. M
Chichester. Wiley. c1988. (250)p.

Thermal design principles of spacecraft and entry bodies
Bevans, Jerry T
London . Academic Press. 1969.

Thermal desorption
Anderson, William C
Annapolis, Md. American Academy of Environmental Engineers. 1993. 1 v.

Thermal desorption spectra, equilibrium desorption rates and equilibrium surface coverages of mechanically polishedand of sand - and bead-blasted inconel 600 surfaces
Camposilvan, J ; Reiter, F
Luxembourg. Commission of the European Communities. Directorate-General Information Market and Innovation. 1981.

Thermal diffusion
Chapman, Sydney
(College Park. 1952). 23 p.

Thermal diffusion in gases
Grew, K. E ; Ibbs, T. L
Cambridge U.P. 1952.

Thermal diffusion isotopic enrichment and radiocarbon dating beyond 50,000 years BP: proefschrift
Grootes, Pieter Meiert
Groningen. Rijksuniversiteit te Groningen. 1977. 221p.

Thermal diffusion potentials and their relation to Soret coefficients
Colledge, Raymond
1953.

Thermal discharges: a guide to power and process plant cooling water discharges into rivers, lakes and seas
Miller, Donald S ; Brighouse, B. A
(Cranfield). BritishHydromechanics Research Association. c1984. iii,221p.

Thermal discharges at nuclear power stations: their management and environmental impacts: a report preparedby a group of experts as a result of a panel meeting held in Vienna, 23-27 October 1972
Vienna. International Atomic Energy Agency. 1974.

Thermal discontinuities in alloy steels subjected to high-speed deformation
Ganguli, Aloke
Salford. University of Salford. 1971.

Thermal dissociation of chemical compounds
Kulikov, I S
Jerusalem. Israel Program for Scientific Translations. 1967. 198p.

Thermal distortion in film lubricated thrust pads
Lingard, Stephen
1966.

Thermal distortion of vertical machining centres a case study
Fielder, John
1997.

Thermal ecology: proceedings of a symposium held at Augusta, Georgia, May3-5, 1973
Gibbons, J. Whitfield ; Sharitz, Rebecca R
Oak Ridge, Tennessee. U.S. Atomic Energy Commission Technical Information Center. 1974.

Thermal effects in exothermic catalytic reactions
Koh, Ho-peng
Salford. University of Salford. 1972.

Thermal effects in fracture of multiphase materials: proceedings of the Euromech Colloquium 255, October 31-November 2, 1989, Paderborn, FRG
Herrmann, Klaus P ; Olesiak, Z. S
Berlin . Springer-Verlag. c1990. vii, 247 p.

Thermal effects in the stability of the machining process
MacManus, B R
Brighton. Brighton Polytechnic. 1969.

Thermal effects in tribology: proceedings of the 6th Leeds-Lyon Symposium on Tribology held in the Institut national des sciences appliquees de Lyon, France September 18-21 1979
Dowson, D
London. Mechanical Engineering Publications for the Institute of Tribology, Leeds University and the Institut national des sciences appliquees Lyon. 1980. viii,340p.

Thermal efficiencies of regenerators operating at low temperatures
Dermott, Thomas
Bradford. 1972. 80p.

Thermal efficiency and power production
Fenton, K
Pitman. 1966.

Thermal effluent disposal from power generation
Zaric, Zoran
Washington. Hemisphere Pub. Corp. c1978.

Thermal electrocyclic reactions
Marvell, Elliot N
London. Academic Press. 1980.

Thermal endurance of polyester enamelled wires using twisted wire specimens: final report
Goldenberg, Harry
Leatherhead. Electrical Research Association. 1966.

Thermal energy conservation: building and services design
Weller, J. W ; Youle, A
London. Applied Science. 1981. viii,269p.

Thermal energy differential scattering cross-section measurements for alkili metal collision partners
McKiernan, John Joseph
1979. 1 v.

Thermal energy from the sea
Hagen, Arthur W
ParkRidge, N.J. Noyes Data Corp. 1975. viii, 150 p.

Thermal energy storage: basic-design-applications to power generation and heat supply
Beckmann, G ; Gilli, P. V
Vienna . Springer-Verlag. 1984. xi,230p.

Thermal energy storage: The report of a NATO Science Committee Conference held at Turnberry, Scotland. 1st-5th March, 1976
Kovach, Eugene G
Brussels. NATO. Scientific Affairs Division. [1976]. 75 p.

Thermal energy storage and regeneration
Schmidt, Frank W ; Willmott, A. John
Washington . Hemisphere Publishing Corporation. c1981. xvi,352p.

Thermal energy storage for the recovery of industrial wasteheat
Wood, R. J
London. Department of Trade and Industry. 1977?. 44p., 219-263p.

Thermal energy storage in aquifers: the design and applications
Schaetzle, Walter J
New York. Pergamon Press. 1980.

Thermal energy storage systems and applications
Dincʹer, Ibrahim ; Rosen, Marc
New York . Wiley. c2002. x, 579 p.

Thermal energy storage system using organic phase change materials with improved thermal conductivity for storage temperatures between 35℗ʻ and 120℗ʻC
Brink, G.J. van den ; Galen, E. van
Luxembourg. Commission of the European Communities. 1984.

Thermal energy transfer across an interface
Mishra, Devendra Raj
Norwich. University of East Anglia. 1975.

Thermal engineering
DiIlio, Charles C ; Nye, Edwin P
Scranton. International TextbookCo. 1963.

Thermal engineering
Solberg, Harry L
New York. Wiley. (1960). 649 p.

Thermal engineering: Soviet power industry research and technology
Oxford. Pergamon.

Thermal environmental conditions for human occupancy
New York, N.Y. ASHRAE. 1974. 12 p.

Thermal environmental engineering
Kuehn, T. H ; Ramsey, J. W ; Threlkeld, James L ; Threlkeld, James L
Upper Saddle River, N.J. Prentice Hall. c1998. xii,740p.

Thermal environmental engineering
Threlkeld, J. L
Prentice-Hall. 1970.

Thermal environmental parameters and their measurement
Madsen, Th. L
Koebenhavn. Danmarks Tekniske Hoejskole. S. 167-181.

Thermal environment and comfort in the home: progress, procrastination and probable trends
Brooks, E. G
London. Institutionof Gas Engineers. 1970.

Thermal environment for indoor swimming pools
Bracknell. Heating and Ventilating Research Association. 1972.

Thermal environment for the student of architecture
Chalkley, J. N ; Cater, Herbert Richard
London. Architectural Press. 1968. 223p.,[3] leaves of plates.

Thermal evolution and bombardment release of deuterium implanted into stainless steel
Haroution, Arousian Ovadis
Salford. University of Salford. 1979.

Thermal expansion
Yates, Bernard
New York. Plenum Press. 1972. ix, 121p.

Thermal expansion - 1971
Graham, M. G ; Hagy, H. E
New York. American Institute of Physics. 1972.

Thermal expansion 6
Peggs, Ian D
New York . Plenum Press. 1978. ix,292p.

Thermal expansion 7
Larsen, David C
New York . Plenum. c1982. xii,212p.

Thermal expansion behaviour of some oxide spinels
Al-Ajaj, Akram Atta
Birmingham. University of Aston. Department of Physics. 1984.

Thermal expansion characteristics of carbon fibre fabric reinforced plastics
Chandra, Madhukar
Salford. University of Salford. 1981.

Thermal expansion corrections to volumetric measuring tanks: an experimental investigation
Hayward, A T J ; Morris, R
London. Institute of Petroleum. 1974.

Thermal expansion corrections to volumetric measuring tanks - an experimental investigation
Hayward, A T J ; Morris, R
London. Institute of Petroleum. 1974.

Thermal expansion of technical solids at low temperatures: a compilation from the literature
Corruccini, Robert J ; Gniewek, J J
Washington. NBS. 1961.

Thermal expansion properties of carbon fibre composites and curing characteristics of resins
McCalla, Benjamin Anthony
Salford. University of Salford. 1978.

Thermal expansion properties of carbon fibre reinforced plastics
Overy, Martyn John
Salford. University of Salford. 1975.

Thermal expansion studies of graphite and composites containing carbon fibres
Pirgon, Oktay
Salford. University of Salford. 1974.

Thermal expansion tests
Stoke-on-Trent. British Ceramic Society. 1976.

Thermal fatigue damage of Fecralloy co-extruded tubing
Lang, E
Lucembourg. Commission of the European Communities. 1988.

Thermal fatigue of gray and ductile irons
Ro˜hrig, K
Greenwich, Conn. Climax Molybdenum Co. 1978. p.75-88.

Thermal fatigue of materials and components: a symposiumsponsored by ASTM Committee E-9 on Thermal Fatigue of Materials and Components
Spera, D ; Mowbray, D
Philadelphia. ASTM. 1976. 262p.

Thermal fatigueof metals
Weronski, Andrzej ; Hejwowski, Tadeusz
New York. Dekker. 1991. vii, 366 p.

Thermal field theories: proceedings of the 2nd Workshop on Thermal Field Theories and Their Applications, Tsukuba, Japan, July 23-27, 1990
Ezawa, Hiroshi ; Arimitsu, Toshihiko ; Hashimoto, Yukio
Amsterdam . North-Holland. 1991. xv, 606 p.